1 Institute of Polymer Chemistry and Physics, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
2 Institute of Polymer Chemistry and Physics, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
3 Institute of Polymer Chemistry and Physics, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
4 Institute of Polymer Chemistry and Physics, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
ReceivedOct 29, 2026
RevisedNov 13, 2026
PublishedNov 18, 2026
Abstract
Petroleum-based packaging persists in the environment for decades to millennia, and the microplastic particles it sheds have been detected in marine and terrestrial ecosystems and in the food chain. Edible coatings, thin layers of food-grade biopolymers formed directly on the product surface, offer a way to extend the shelf life of fresh produce while reducing dependence on synthetic packaging. This review assesses the chemical nature, structure, functional properties, preparation technologies, and preservation role of edible coatings, with particular emphasis on fruits and vegetables. Polysaccharide-, protein-, and lipid-based materials are compared in terms of barrier properties, gas permeability, and antimicrobial and antioxidant activity, and the advantages of composite and multilayer systems are discussed. The review explains how coatings regulate gas exchange, transpiration, and microbial spoilage, and it compiles quantitative evidence, including reductions in water-vapor permeability or transmission of up to 97%–98% in lipid-containing systems and a 21-day shelf life for coated fresh-cut melon. Conventional fabrication methods (solution casting, dipping, spraying, and extrusion) are evaluated alongside emerging approaches such as electrospinning, three-dimensional printing, reactive extrusion, nanotechnology, and layer-by-layer assembly. Finally, the review examines safety, migration, and regulatory requirements, identifies the main barriers to industrial scale-up, and outlines research priorities for next-generation edible coatings.
1. Adibi, A., Trinh, B. M., & Mekonnen, T. H. (2023). Recent progress in sustainable barrier paper coating for food packaging applications. Progress in Organic Coatings, 181, Article 107566.
2. Ahari, H., & Lahijani, L. K. (2021). Migration of silver and copper nanoparticles from food coating. Coatings, 11(4), Article 380.
3. Barbosa, J. V., Martins, J., Carvalho, L., Bastos, M. M. S. M., & Magalhães, F. D. (2019). Effect of peroxide oxidation on the expansion of potato starch foam. Industrial Crops and Products, 137, 428–435.
4. Basiak, E., Lenart, A., & Debeaufort, F. (2018). How glycerol and water contents affect the structural and functional properties of starch-based edible films. Polymers, 10(4), Article 412.
5. Batool, S., Hussain, Z., Niazi, M. B. K., Liaqat, U., & Afzal, M. (2019). Biogenic synthesis of silver nanoparticles and evaluation of physical and antimicrobial properties of Ag/PVA/starch nanocomposites hydrogel membranes for wound dressing application. Journal of Drug Delivery Science and Technology, 52, 403–414.
6. Cazón, P., Velazquez, G., Ramírez, J. A., & Vázquez, M. (2017). Polysaccharide-based films and coatings for food packaging: A review. Food Hydrocolloids, 68, 136–148.
7. Chae, Y., & An, Y.-J. (2018). Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review. Environmental Pollution, 240, 387–395.
8. Chen, H., Wang, J., Cheng, Y., Wang, C., Liu, H., Bian, H., Pan, Y., Sun, J., & Han, W. (2019). Application of protein-based films and coatings for food packaging: A review. Polymers, 11(12), Article 2039.
9. Chen, L., Zhang, H., McClements, D. J., Zhang, Z., Zhang, R., Jin, Z., et al. (2019). Effect of dietary fibers on the structure and digestibility of fried potato starch: A comparison of pullulan and pectin. Carbohydrate Polymers, 215, 47–57.
10. Cheng, H., Chen, L., McClements, D. J., Yang, T., Zhang, Z., Ren, F., Miao, M., Tian, Y., & Jin, Z. (2021). Starch-based biodegradable packaging materials: A review of their preparation, characterization and diverse applications in the food industry. Trends in Food Science & Technology, 114, 70–82.
11. Choi, I., Lee, J. Y., Lacroix, M., & Han, J. (2017). Intelligent pH indicator film composed of agar/potato starch and anthocyanin extracts from purple sweet potato. Food Chemistry, 218, 122–128.
12. Cloete, L., Picot-Allain, C., Ramasawmy, B., Neetoo, H., Ramful-Baboolall, D., & Emmambux, M. N. (2023). Drivers and barriers for commercial uptake of edible coatings for fresh fruits and vegetables industry: A review. Food Reviews International, 39(6), 3481–3514.
13. Colussi, R., Pinto, V. Z., El Halal, S. L. M., Biduski, B., Prietto, L., Castilhos, D. D., et al. (2017). Acetylated rice starches films with different levels of amylose: Mechanical, water vapor barrier, thermal, and biodegradability properties. Food Chemistry, 221, 1614–1620.
14. Combrzyński, M., Wójtowicz, A., Mitrus, M., Oniszczuk, T., Matwijczuk, A., Pawelczyk, A., et al. (2019). Effect of starch type and screw speed on mechanical properties of extrusion-cooked starch-based foams. International Agrophysics, 33, 233–240.
15. Commission Regulation (EU) No 1147/2012 of 4 December 2012 amending Annex II to Regulation (EC) No 1333/2008 as regards the use of beeswax (E 901), carnauba wax (E 903), shellac (E 904) and microcrystalline wax (E 905) on certain fruits. (2012). Official Journal of the European Union, L 333, 34–36.
16. Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food. (2011). Official Journal of the European Union, L 12, 1–89.
17. Cox, H. J., Li, J., Saini, P., Paterson, J. R., Sharples, G. J., & Badyal, J. P. S. (2021). Bioinspired and eco-friendly high efficacy cinnamaldehyde antibacterial surfaces. Journal of Materials Chemistry B, 9(12), 2918–2930.
18. Crespy, D., Bozonnet, M., & Meier, M. (2008). 100 years of Bakelite, the material of a 1000 uses. Angewandte Chemie International Edition, 47, 3322–3328.
19. Dammak, M., Fourati, Y., Tarrés, Q., Delgado-Aguilar, M., Mutjé, P., & Boufi, S. (2020). Blends of PBAT with plasticized starch for packaging applications: Mechanical properties, rheological behaviour and biodegradability. Industrial Crops and Products, 144, Article 112061.
20. Darwesh, H., Rasheed, R., & Hamzah, H. (2026). Microbial degradation and the persistence paradox of conventional and biodegradable microplastics. Discover Materials. https://doi.org/10.1007/s43939-026-00820-2
21. Dey, A., Dhumal, C. V., Sengupta, P., Kumar, A., Pramanik, N. K., & Alam, T. (2021). Challenges and possible solutions to mitigate the problems of single-use plastics used for packaging food items: A review. Journal of Food Science and Technology, 58(9), 3251–3269.
22. Din, M. I., Ghaffar, T., Najeeb, J., Hussain, Z., Khalid, R., & Zahid, H. (2020). Potential perspectives of biodegradable plastics for food packaging application: Review of properties and recent developments. Food Additives & Contaminants: Part A, 37(4), 665–680.
23. do Evangelho, J. A., da Silva Dannenberg, G., Biduski, B., El Halal, S. L. M., Kringel, D. H., Gularte, M. A., et al. (2019). Antibacterial activity, optical, mechanical, and barrier properties of corn starch films containing orange essential oil. Carbohydrate Polymers, 222, Article 114981.
24. do Val Siqueira, L., Arias, C. I. L. F., Maniglia, B. C., & Tadini, C. C. (2021). Starch-based biodegradable plastics: Methods of production, challenges and future perspectives. Current Opinion in Food Science, 38, 122–130.
25. Domene-Lopez, D., Garcia-Quesada, J. C., Martin-Gullon, I., & Montalban, M. G. (2019). Influence of starch composition and molecular weight on physicochemical properties of biodegradable films. Polymers, 11, Article 1084.
26. Engel, J. B., Ambrosi, A., & Tessaro, I. C. (2019). Development of biodegradable starch-based foams incorporated with grape stalks for food packaging. Carbohydrate Polymers, 225, Article 115234.
27. Fadeyibi, A., Osunde, Z. D., Egwim, E. C., & Idah, P. A. (2017). Performance evaluation of cassava starch-zinc nanocomposite film for tomatoes packaging. Journal of Agricultural Engineering, 48, 137–146.
28. Fakhouri, F. M., Martelli, S. M., Bertan, L. C., Yamashita, F., Innocentini Mei, L. H., & Collares Queiroz, F. P. (2012). Edible films made from blends of manioc starch and gelatin. LWT—Food Science and Technology, 49, 149–154.
29. Falguera, V., Quintero, J. P., Jiménez, A., Muñoz, J. A., & Ibarz, A. (2011). Edible films and coatings: Structures, active functions and trends in their use. Trends in Food Science & Technology, 22(6), 292–303.
30. Feng, C., Wang, Q., Li, H., Zhou, Q., & Meng, W. (2018). Effects of pea protein on the properties of potato starch-based 3D printing materials. International Journal of Food Engineering, 14, Article 20170297.
31. FloZein Products. (n.d.). World leading manufacturer of vegan coatings since 1976. http://www.zeinproducts.com
32. Fonseca, L. M., Cruxen, C., Bruni, G. P., Fiorentini, A. M., Zavareze, E. D. R., Lim, L. T., et al. (2019). Development of antimicrobial and antioxidant electrospun soluble potato starch nanofibers loaded with carvacrol. International Journal of Biological Macromolecules, 139, 1182–1190.
33. Fonseca-Florido, H. A., Soriano-Corral, F., Yanez-Macias, R., Gonzalez-Morones, P., Hernandez-Rodriguez, F., Aguirre-Zurita, J., et al. (2019). Effects of multiphase transitions and reactive extrusion on in situ thermoplasticization/succination of cassava starch. Carbohydrate Polymers, 225, Article 115250.
34. Food and Agriculture Organization of the United Nations. (2019). The state of food and agriculture 2019: Moving forward on food loss and waste reduction.
35. Fourati, Y., Magnin, A., Putaux, J.-L., & Boufi, S. (2020). One-step processing of plasticized starch/cellulose nanofibrils nanocomposites via twin-screw extrusion. Carbohydrate Polymers, 229, Article 115554.
36. Gaines, L. G. (2023). Historical and current usage of per- and polyfluoroalkyl substances (PFAS): A literature review. American Journal of Industrial Medicine, 66(5), 353–378.
37. Gao, W., Wu, W., Liu, P., Hou, H., Li, X., & Cui, B. (2020). Preparation and evaluation of hydrophobic biodegradable films made from corn/octenylsuccinated starch. International Journal of Biological Macromolecules, 142, 376–383.
38. Garcia, V. A. d. S., Borges, J. G., Maciel, V. B. V., Mazalli, M. R., Lapa-Guimaraes, J. d. G., Vanin, F. M., et al. (2018). Gelatin/starch orally disintegrating films as a promising system for vitamin C delivery. Food Hydrocolloids, 79, 127–135.
39. Gatt, E., Rigal, L., & Vandenbossche, V. (2018). Biomass pretreatment with reactive extrusion using enzymes: A review. Industrial Crops and Products, 122, 329–339.
40. Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7), Article e1700782. https://doi.org/10.1126/sciadv.1700782
41. Gove, J. M., Whitney, J. L., McManus, M. A., Lecky, J., Carvalho, F. C., Lynch, J. M., et al. (2019). Prey-size plastics are invading larval fish nurseries. Proceedings of the National Academy of Sciences of the United States of America, 116, 24143–24149.
42. Han, J., Salmieri, S., Le Tien, C., & Lacroix, M. (2010). Improvement of water barrier property of paperboard by coating application with biodegradable polymers. Journal of Agricultural and Food Chemistry, 58(5), 3125–3131.
43. Han, J. W., Ruiz-Garcia, L., Qian, J. P., & Yang, X. T. (2018). Food packaging: A comprehensive review and future trends. Comprehensive Reviews in Food Science and Food Safety, 17(4), 860–877.
44. Ilhan, I., Turan, D., Gibson, I., & ten Klooster, R. (2021). Understanding the factors affecting the seal integrity in heat sealed flexible food packages: A review. Packaging Technology and Science, 34(6), 321–337.
45. International Council for Harmonisation. (2024). Q3C(R9): Guideline for residual solvents.
46. Issa, A. T., Schimmel, K. A., Worku, M., Shahbazi, A., Ibrahim, S. A., & Tahergorabi, R. (2018). Sweet potato starch-based nanocomposites: Development, characterization, and biodegradability. Starch/Stärke, 70, Article 1700273.
47. Jahangiri, F., Mohanty, A. K., & Misra, M. (2024). Sustainable biodegradable coatings for food packaging: Challenges and opportunities. Green Chemistry, 26, 4934–4974.
48. Jahangiri, F., Mohanty, A. K., Pal, A. K., Clemmer, R., Gregori, S., & Misra, M. (2025). Wax coatings for paper packaging applications: Study of the coating effect on surface, mechanical, and barrier properties. ACS Environmental Au, 5(2), 165–182. https://doi.org/10.1021/acsenvironau.4c00055
49. Jiang, T., Duan, Q., Zhu, J., Liu, H., & Yu, L. (2020). Starch-based biodegradable materials: Challenges and opportunities. Advanced Industrial and Engineering Polymer Research, 3, 8–18.
50. Julien, C., Mendieta, J. R., & Gutiérrez, T. J. (2019). Characterization of biodegradable/non-compostable films made from cellulose acetate/corn starch blends processed under reactive extrusion conditions. Food Hydrocolloids, 89, 67–79.
51. Kaur, K., Jindal, R., Maiti, M., & Mahajan, S. (2019). Studies on the properties and biodegradability of PVA/Trapa natans starch composite films. International Journal of Biological Macromolecules, 123, 826–836.
52. Kouhi, M., Prabhakaran, M. P., & Ramakrishna, S. (2020). Edible polymers: An insight into its application in food, biomedicine and cosmetics. Trends in Food Science & Technology, 103, 248–263.
53. Kumar, P. (2018). Role of plastics on human health. Indian Journal of Pediatrics, 85, 384–389.
54. Kuo, C.-C., Liu, L.-C., Teng, W.-F., Chang, H.-Y., Chien, F.-M., Liao, S.-J., et al. (2016). Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys for 3D printing applications. Composites Part B: Engineering, 86, 36–39.
55. Leyva-Gutierrez, F. M., & Wang, T. (2021). Crystallinity and water vapor permeability of n-alkane, alcohol, aldehyde, and fatty acid constituents of natural waxes. Industrial & Engineering Chemistry Research, 60(41), 14651–14663.
56. Li, C., Hu, Y., & Li, E. (2021). Effects of amylose and amylopectin chain-length distribution on the kinetics of long-term rice starch retrogradation. Food Hydrocolloids, 111, Article 106239.
57. Limonta, G., Mancia, A., Benkhalqui, A., Bertolucci, C., Abelli, L., Fossi, M. C., et al. (2019). Microplastics induce transcriptional changes, immune response and behavioral alterations in adult zebrafish. Scientific Reports, 9, Article 15775.
58. Liu, B., Zhang, J., & Guo, H. (2022). Research progress of polyvinyl alcohol water-resistant film materials. Membranes, 12(3), Article 347.
59. Liu, G., Gu, Z., Hong, Y., Cheng, L., & Li, C. (2017). Electrospun starch nanofibers: Recent advances, challenges, and strategies for potential pharmaceutical applications. Journal of Controlled Release, 252, 95–107.
60. Lomeli-Ramirez, M. G., Valdez-Fausto, E. M., Renteria-Urquiza, M., Jimenez-Amezcua, R. M., Anzaldo Hernandez, J., Torres-Rendon, J. G., et al. (2018). Study of green nanocomposites based on corn starch and cellulose nanofibrils from Agave tequilana Weber. Carbohydrate Polymers, 201, 9–19.
61. Maniglia, B. C., Lima, D. C., Matta Junior, M. D., Le-Bail, P., Le-Bail, A., & Augusto, P. E. D. (2019). Hydrogels based on ozonated cassava starch: Effect of ozone processing and gelatinization conditions on enhancing 3D-printing applications. International Journal of Biological Macromolecules, 138, 1087–1097.
62. Marin-Kuan, M., Pagnotti, V., Patin, A., Moulin, J., Latado, H., Varela, J., Hammel, Y.-A., Gude, T., Moor, H., & Billinton, N. (2023). Interlaboratory study to evaluate a testing protocol for the safety of food packaging coatings. Toxics, 11(2), Article 156.
63. Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020). Review of recent advances in the biodegradability of polyhydroxyalkanoate (PHA) bioplastics and their composites. Green Chemistry, 22(17), 5519–5558.
64. Mensitieri, G., Di Maio, E., Buonocore, G. G., Nedi, I., Oliviero, M., Sansone, L., & Iannace, S. (2011). Processing and shelf life issues of selected food packaging materials and structures from renewable resources. Trends in Food Science & Technology, 22(2–3), 72–80.
65. Merino, D., Mansilla, A. Y., Casalongue, C. A., & Alvarez, V. A. (2019). Effect of nanoclay addition on the biodegradability and performance of starch-based nanocomposites as mulch films. Journal of Polymers and the Environment, 27, 1959–1970.
66. Miao, J., Liu, H., Li, Y., & Zhang, X. (2018). Biodegradable transparent substrate based on edible starch–chitosan embedded with nature-inspired conductive nanocomposites for wearable green electronics. ACS Applied Materials & Interfaces, 10, 23037–23047.
67. Mohamed, S. A., El-Sakhawy, M., & El-Sakhawy, M. A.-M. (2020). Polysaccharides, protein and lipid-based natural edible films in food packaging: A review. Carbohydrate Polymers, 238, Article 116178.
68. Mohit, N., Singh Sharanagat, V., Yogesh, K., & Lochan, S. (2020). Development and characterization of elephant foot yam starch-hydrocolloids based edible packaging film. Journal of Food Science and Technology, 57, 1331–1341.
69. Mondragon, M., Lopez-Villegas, O., Sanchez-Valdes, S., & Rodriguez-Gonzalez, F. J. (2020). Effect of thermoplastic starch and photocrosslinking on the properties and morphology of electrospun poly(ethylene-co-vinyl alcohol) mats. Polymer Engineering & Science, 60, 474–480.
70. Na, X., Zou, B., Zheng, X., Du, M., Zhu, B., & Wu, C. (2023). Synergistic antimicrobial hybrid bio-surface formed by self-assembled BSA nanoarchitectures with chitosan oligosaccharide. Biomacromolecules, 24(9), 4093–4102.
71. Nerín, C., Bourdoux, S., Faust, B., Gude, T., Lesueur, C., Simat, T., Stoermer, A., Van Hoek, E., & Oldring, P. (2022). Guidance in selecting analytical techniques for identification and quantification of non-intentionally added substances (NIAS) in food contact materials. Food Additives & Contaminants: Part A, 39(3), 620–643.
72. Oleyaei, S. A., Zahedi, Y., Ghanbarzadeh, B., & Moayedi, A. A. (2016). Modification of physicochemical and thermal properties of starch films by incorporation of TiO2 nanoparticles. International Journal of Biological Macromolecules, 89, 256–264.
73. Oliveira, V., Santos, F., Leite, R., Aroucha, E., & Silva, K. (2018). Use of biopolymeric coating hydrophobized with beeswax in post-harvest conservation of guavas. Food Chemistry, 259, 55–64.
74. Parija, S., Misra, M., & Mohanty, A. K. (2001). Studies of natural gum adhesive extracts: An overview. Journal of Macromolecular Science, Part C: Polymer Reviews, 41(3), 175–197.
75. Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013). Application of bioplastics for food packaging. Trends in Food Science & Technology, 32(2), 128–141.
76. Peng, J.-L., Peng, X.-L., Runt, J., Huang, C.-M., Huang, K.-S., & Yeh, J.-T. (2018). Thermoplastic starch and glutaraldehyde modified thermoplastic starch foams prepared using supercritical carbon dioxide fluid as a blowing agent. Polymers for Advanced Technologies, 29, 2643–2654.
77. Perez, B., Nykvist, H., Brogger, A. F., Larsen, M. B., & Falkeborg, M. F. (2019). Impact of macronutrients printability and 3D-printer parameters on 3D-food printing: A review. Food Chemistry, 287, 249–257.
78. Plastics Europe. (2025). Plastics—The fast facts 2025. Plastics Europe AISBL. https://plasticseurope.org/knowledge-hub/plastics-the-fast-facts-2025/
79. Rasheed, M., & Parveez, B. (2021). Coating on packaging products to enhance shelf life. In Biopolymers and biocomposites from agro-waste for packaging applications (pp. 1–33). Elsevier.
80. Reddy, C. K., Choi, S. M., Lee, D. J., & Lim, S. T. (2018). Complex formation between starch and stearic acid: Effect of enzymatic debranching for starch. Food Chemistry, 244, 136–142.
81. Regulation (EC) No 1333/2008 of the European Parliament and of the Council of 16 December 2008 on food additives. (2008). Official Journal of the European Union, L 354, 16–33.
82. Reis, M. O., Olivato, J. B., Bilck, A. P., Zanela, J., Grossmann, M. V. E., & Yamashita, F. (2018). Biodegradable trays of thermoplastic starch/poly(lactic acid) coated with beeswax. Industrial Crops and Products, 112, 481–487.
83. Ren, L., Yan, X., Zhou, J., Tong, J., & Su, X. (2017). Influence of chitosan concentration on mechanical and barrier properties of corn starch/chitosan films. International Journal of Biological Macromolecules, 105, 1636–1643.
84. Rocca-Smith, J. R., Pasquarelli, R., Lagorce-Tachon, A., Rousseau, J., Fontaine, S., Aguié-Béghin, V., Debeaufort, F., & Karbowiak, T. (2019). Toward sustainable PLA-based multilayer complexes with improved barrier properties. ACS Sustainable Chemistry & Engineering, 7(4), 3759–3771.
85. Rochman, C. M., Hoh, E., Kurobe, T., & Teh, S. J. (2013). Ingested plastic transfers hazardous chemicals to fish and induces hepatic stress. Scientific Reports, 3, Article 3263.
86. Rodrigues, A., & Emeje, M. (2012). Recent applications of starch derivatives in nanodrug delivery. Carbohydrate Polymers, 87, 987–994.
87. Saiah, R., Sreekumar, P. A., Leblanc, N., Castandet, M., & Saiter, J.-M. (2007). Study of wheat-flour-based agropolymers: Influence of plasticizers on structure and aging behavior. Cereal Chemistry, 84, 276–281.
88. Sampathkumar, K., Tan, K. X., & Loo, S. C. J. (2020). Developing nano-delivery systems for agriculture and food applications with nature-derived polymers. iScience, 23, Article 101055.
89. Scheurer, M., & Bigalke, M. (2018). Microplastics in Swiss floodplain soils. Environmental Science & Technology, 52, 3591–3598.
90. Schnurr, R. E. J., Alboiu, V., Chaudhary, M., Corbett, R. A., Quanz, M. E., Sankar, K., et al. (2018). Reducing marine pollution from single-use plastics (SUPs): A review. Marine Pollution Bulletin, 137, 157–171.
91. Siyamak, S., Laycock, B., & Luckman, P. (2020). Synthesis of starch graft-copolymers via reactive extrusion: Process development and structural analysis. Carbohydrate Polymers, 227, Article 115066.
92. Solenis. (n.d.). TopScreen biowax-based barrier coatings. http://www.solenis.com
93. Suriyatem, R., Auras, R. A., & Rachtanapun, P. (2018). Biodegradable rice starch/carboxymethyl chitosan films with added propolis extract for potential use as active food packaging. Polymers, 10, Article 954.
94. United Nations Environment Programme. (2024). Food waste index report 2024. Think eat save: Tracking progress to halve global food waste.
95. Verma, S., Nayak, S. K., & Mohanty, S. (2020). Adhesion of polymer coatings. In Polymer coatings: Technologies and applications (pp. 287–307). CRC Press.
96. Vert, M., Doi, Y., Hellwich, K.-H., Hess, M., Hodge, P., Kubisa, P., Rinaudo, M., & Schué, F. (2012). Terminology for biorelated polymers and applications (IUPAC Recommendations 2012). Pure and Applied Chemistry, 84(2), 377–410.
97. Wang, H., Kong, L., & Ziegler, G. R. (2019). Aligned wet-electrospun starch fiber mats. Food Hydrocolloids, 90, 113–117.
98. Wang, W., Jin, X., Zhu, Y., Zhu, C., Yang, J., Wang, H., et al. (2016). Effect of vapor-phase glutaraldehyde crosslinking on electrospun starch fibers. Carbohydrate Polymers, 140, 356–361.
99. Wu, F., Misra, M., & Mohanty, A. K. (2021). Challenges and new opportunities on barrier performance of biodegradable polymers for sustainable packaging. Progress in Polymer Science, 117, Article 101395.
100. Wu, W.-C., Hsiao, P.-Y., & Huang, Y.-C. (2019). Effects of amylose content on starch-chitosan composite film and its application as a wound dressing. Journal of Polymer Research, 26, Article 137.
101. Xu, E., Campanella, O. H., Ye, X., Jin, Z., Liu, D., & BeMiller, J. N. (2020). Advances in conversion of natural biopolymers: A reactive extrusion (REX)–enzyme-combined strategy for starch/protein-based food processing. Trends in Food Science & Technology, 99, 167–180.
102. Xu, E., Long, J., Wu, Z., Li, H., Wang, F., Xu, X., et al. (2015). Characterization of volatile flavor compounds in Chinese rice wine fermented from enzymatic extruded rice. Journal of Food Science, 80, C1476–C1489.
103. Yousuf, B., Sun, Y., & Wu, S. (2022). Lipid and lipid-containing composite edible coatings and films. Food Reviews International, 38(Suppl. 1), 574–597.
104. Zambrano-Zaragoza, M. L., Quintanar-Guerrero, D., Del Real, A., Piñon-Segundo, E., & Zambrano-Zaragoza, J. F. (2017). The release kinetics of β-carotene nanocapsules/xanthan gum coating and quality changes in fresh-cut melon. Carbohydrate Polymers, 157, 1874–1882.
105. Zeng, G. S., Hu, C., Zou, S., Zhang, L., & Sun, G. (2019). BP neural network model for predicting the mechanical performance of a foamed wood-fiber reinforced thermoplastic starch composite. Polymer Composites, 40, 3923–3928.
106. Zhang, C., Chen, F., Meng, W., Li, C., Cui, R., Xia, Z., et al. (2021). Polyurethane prepolymer-modified high-content starch-PBAT films. Carbohydrate Polymers, 253, Article 117168.
107. Zhang, W., Xiao, H., & Qian, L. (2014). Enhanced water vapour barrier and grease resistance of paper bilayer-coated with chitosan and beeswax. Carbohydrate Polymers, 101, 401–406.
108. Zheng, L., Yu, Y., Tong, Z., Zou, Q., Han, S., & Jiang, H. (2019). The characteristics of starch gels molded by 3D printing. Journal of Food Processing and Preservation, 43, Article e13993.
109. Zhou, Z., Ma, J., Li, K., Zhang, W., Li, K., Tu, X., Liu, L., Xu, J., & Zhang, H. (2021). A plant leaf-mimetic membrane with controllable gas permeation for efficient preservation of perishable products. ACS Nano, 15(5), 8742–8752.
110. Zubair, M., Pradhan, R. A., Arshad, M., & Ullah, A. (2021). Recent advances in lipid derived bio-based materials for food packaging applications. Macromolecular Materials and Engineering, 306(7), Article 2000799.
How to Cite
Shomurodov Doniyor, Ataxanov Abdumutalib, Normurodov Nurbek, Mamadiyorov Burxon (2026). EDIBLE COATINGS: A COMPREHENSIVE REVIEW OF THEIR COMPOSITION, PREPARATION TECHNOLOGIES, AND ROLE IN FOOD PRESERVATION. Science and Innovation, 5(10), 56-74. https://doi.org/10.67620/sai.510a0007