1 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers – National Research University (TIIAME-NRU), Tashkent, Uzbekistan
2 Department of Hydrotechnical Structures and Engineering Constructions, TIIAME-NRU, Tashkent, Uzbekistan
3 Department of Hydrotechnical Structures and Engineering Constructions, TIIAME-NRU, Tashkent, Uzbekistan
4 Department of Hydrotechnical Structures and Engineering Constructions, TIIAME-NRU, Tashkent, Uzbekistan
5 Department of Hydrotechnical Structures and Engineering Constructions, TIIAME-NRU, Tashkent, Uzbekistan
6 Department of Hydrotechnical Structures and Engineering Constructions, TIIAME-NRU
ReceivedSep 19, 2026
RevisedOct 04, 2026
PublishedOct 09, 2026
Аннотация
This paper investigates the hydraulics of a flow constricted by a bank-protection structure - a spur dike, locally referred to as a “banket” - installed at a 90° angle to the flow axis in an open rectangular flume. Using data from a laboratory flume test (Test No. 9: flume width B = 0.40 m, spur length lδ = 0.08 m, constriction ratio nδ = 0.2, bed slope ib = 0.0001), a step-by-step calculation procedure is developed for the flow in the expansion zone downstream of the spur dike. The procedure determines the Chezy and Pavlovsky resistance coefficients separately for the bed and walls of the flume, calculates the expansion angle and reach length by successive approximation, derives the mean and depth-averaged velocities of the transit flow from a universal dimensionless relationship, and estimates the reverse velocities within the recirculation zone. The calculated and experimental results agree well: the length of the recirculation zone differs by less than 3% (Lcalc = 93 cm versus Lexp = 95 cm), and the calculated and experimental velocity profiles closely match. The proposed procedure is applicable to the design and hydraulic analysis of bank-protection and river-training structures on rivers and canals.
1. Achour, B. (2015). Chezy’s resistance coefficient in a circular conduit. The Open Civil Engineering Journal, 9, 187–195. https://doi.org/10.2174/1874149501509010187
2. Achour, B., & Bedjaoui, A. (2006). Contribution au calcul de la profondeur normale dans un canal rectangulaire. LARHYSS Journal, 5, 139–147.
3. Babarutsi, S., Nassiri, M., & Chu, V. H. (1996). Computation of shallow recirculating flow dominated by friction. Journal of Hydraulic Engineering, 122(7), 367–372. https://doi.org/10.1061/(ASCE)0733-9429(1996)122:7(367)
4. Chiu, C.-L., Mizumura, K., & Lin, H.-C. (1976). Simulation of hydraulic processes in open channels. Journal of the Hydraulics Division, 102(2), 185–206. https://doi.org/10.1061/JYCEAJ.0004481
5. Ferguson, R. I., Hardy, R. J., & Hodge, R. A. (2019). Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales. Earth Surface Processes and Landforms, 44(12), 2437–2449. https://doi.org/10.1002/esp.4673
6. Franques, J. T., Jr. (1971). A finite element model for two-dimensional steady flow through contractions in natural channels [Doctoral dissertation, Louisiana State University]. LSU Historical Dissertations and Theses. https://doi.org/10.31390/gradschool_disstheses.2123
7. Gao, S., Mostefaoui, O., Mignot, E., & De Mulder, T. (2025). Large eddy simulation of flow in a T-shaped open-channel bifurcation [Poster presentation]. Ghent University - Faculty of Engineering and Architecture Research Symposium 2025, Ghent, Belgium. https://doi.org/10.5281/zenodo.17435352
8. Giustolisi, O. (2004). Using genetic programming to determine Chézy resistance coefficient in corrugated channels. Journal of Hydroinformatics, 6(3), 157–173. https://doi.org/10.2166/hydro.2004.0013
9. Joldassov, S., Tattibaev, S., Bimurzayeva, Z., Bayzhigitova, M., & Loginov, G. (2023). Analysis of existing methods for calculating the roughness coefficient of channels along the perimeter of the channel. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 1(457), 56–71. https://doi.org/10.32014/2023.2518-170X.259
10. Loukam, I., Achour, B., & Djeddou, M. (2020). Chezy’s resistance coefficient in a horseshoe-shaped tunnel. Revue des Sciences de l’Eau / Journal of Water Science, 32(4), 379–392. https://doi.org/10.7202/1069572ar
11. Loukam, I., Achour, B., & Djemili, L. (2018). Chezy’s resistance coefficient in an egg-shaped conduit. Journal of Water and Land Development, 37(1), 87–96. https://doi.org/10.2478/jwld-2018-0028
12. Majid, S. A., & Tripathi, S. (2022). Experimental study on pressure flow due to vertical contraction. In A. K. Dikshit, B. Narasimhan, B. Kumar, & A. K. Patel (Eds.), Innovative trends in hydrological and environmental systems (pp. 267–278). Springer. https://doi.org/10.1007/978-981-19-0304-5_20
13. Majid, S. A., & Tripathi, S. (2023). Numerical simulation of pressure flow due to vertical contraction on a rigid bed. In P. V. Timbadiya, P. L. Patel, V. P. Singh, & B. Barman (Eds.), Fluid mechanics and hydraulics: Proceedings of the 26th International Conference on Hydraulics, Water Resources and Coastal Engineering (HYDRO 2021) (pp. 139–149). Springer. https://doi.org/10.1007/978-981-19-9151-6_12
14. Mulahasan, S., Al-Osmy, S., & Alhashimi, S. (2021). Modelling of flow pattern in an open channel with sidewall obstruction. IOP Conference Series: Materials Science and Engineering, 1090(1), 012097. https://doi.org/10.1088/1757-899X/1090/1/012097
15. Namihira, A., Takaki, K., & Kobayashi, H. (2004). Analysis of flow through constrictions with orifices bored in right and left alternately in an open channel. Proceedings of Hydraulic Engineering, 48, 667–672. https://doi.org/10.2208/prohe.48.667
16. Proust, S., Rivière, N., Bousmar, D., Paquier, A., Zech, Y., & Morel, R. (2006). Flow in compound channel with abrupt floodplain contraction. Journal of Hydraulic Engineering, 132(9), 958–970. https://doi.org/10.1061/(ASCE)0733-9429(2006)132:9(958)
17. Shirley, E. D., & Lopes, V. L. (1991). Normal-depth calculations in complex channel sections. Journal of Irrigation and Drainage Engineering, 117(2), 220–232. https://doi.org/10.1061/(ASCE)0733-9437(1991)117:2(220)
18. Singh, S. K., Das, V., Chaudhuri, S., & Debnath, K. (2023). Spatial variation of mean flow and turbulence characteristics within channel contraction – an experimental approach. ISH Journal of Hydraulic Engineering, 29(sup1), 16–25. https://doi.org/10.1080/09715010.2022.2149282
19. Tymiński, T., Kałuża, T., & Hämmerling, M. (2022). Verification of methods for determining flow resistance coefficients for floodplains with flexible vegetation. Sustainability, 14(23), 16170. https://doi.org/10.3390/su142316170
20. Weber, L. J., Schumate, E. D., & Mawer, N. (2001). Experiments on flow at a 90° open-channel junction. Journal of Hydraulic Engineering, 127(5), 340–350. https://doi.org/10.1061/(ASCE)0733-9429(2001)127:5(340)
Как цитировать
Bakiev Masharif, Kuryozov Otaboy, Yakubov Kuvonchbek, Khasanov Khojiakbar, Khalimbetov Azat, Ganjayev Mukhammad (2026). HYDRAULIC CALCULATION PROCEDURE FOR FLOW EXPANSION CONSTRICTED BY A SPUR DIKE. Science and Innovation, 5(9), 24-34. https://doi.org/10.67620/sai.59a0004