PRACTICAL RECOMMENDATIONS FOR THE CALCULATION OF THE STRENGTH OF SLOPED SECTIONS OF BRIDGE T-BEAMS REINFORCED WITH HIGH-STRENGTH COMPOSITE MATERIALS

Ahmedov Sherzod Bahodirovich; Nasvaliyev Nozimjon Karimjon o`g`li

doi:10.5281/zenodo.6527482

PRACTICAL RECOMMENDATIONS FOR THE CALCULATION OF THE STRENGTH OF SLOPED SECTIONS OF BRIDGE T-BEAMS REINFORCED WITH HIGH-STRENGTH COMPOSITE MATERIALS

07.05.2022 International Scientific Journal "Science and Innovation". Series 1. Volume 1 Issue 1

Ahmedov Sherzod Bahodirovich, Nasvaliyev Nozimjon Karimjon o`g`li

Abstract. The article reflects the results of studies of the bearing capacity of reinforced concrete tee beams reinforced with high-strength fabric carbon fiber polymer in the area of transverse forces. The evaluation of their shear resistance was carried out depending on the content of the longitudinal working reinforcement, the ratio of the shear span to the working height of the section, the spacing, the number and orientation of the bonded strips of the reinforcing fibrous polymer.

Keywords: strength, transverse bending, carbon fiber material, carbon fiber, reinforced concrete tee beams, reinforcement.

References:

1. Ашрабов А.А., Раупов Ч.С. Расчетная модель прочности железобетонных балок с учетом усилий и деформаций среза. Ташкент. Проблемы механики. 2005. № 3. с.50-55. 2. J. Jayaprakash, Abdul Aziz A. A., Abang, A A., Ashrabov, A. A. (2004) External Shear Strengthening Strategies of RC Beams with Bi-Directional Carbon Fibre Reinforced Polymer Sheet. Proceedings of International Conference on Bridge and Hydraulic structures, pp 219-224. 3. А. С. ЗАЛЕСОВ, Ю. А. КЛИМОВ. ПРОЧНОСТЬ ЖЕЛЕЗОБЕТОННЫХ КОНСТРУКЦИЙ ПРИ ДЕЙСТВИИ ПОПЕРЕЧНЫХ СИЛ. КИЕВ. «БУДИВЭЛНЫК». 1989. – 105 С. 4. Proceedings of the International Conference of “Integrative Risk Mangement Towards Resilient”, Davos, 2016 5. Axmedov.Sh.B. Strength of rc elements strengthened with external fiber polymerreinforcement // International Journal of Advanced Research in Science, Enjineering and technology.- India, 2019.Vol.6, Isue 9, September 2019. 10851-10856 (ISSN: 2350-0328). 6. Ахмедов Ш.Б., Ашрабов А.А. Прочность мостовых тавровых железобетонных балок, усиленных углепластиковым внешним армированием // “ТАЙИ хабарномаси” илмий-техник журнали. Тошкент: ТАЙЛҚЭИ, 2019. №1, 40-46 б. 7. Ashrabov. A.A. To the research of the contact interactions in the cracks of the reinforced concrete elements // Proceedings of the Russian Academy of Architecture and Construction, Moscow, 2009, 89-94 с. 8. Ashrabov A.A., Ishonkhodjaev A.O., Raupov Ch.S. On shear force transfer across the cracks in RC elements reinforced with fibre polymer materials // Journal of the Academy of Sciences of Uzbekistan "Problems of mechanics", - Tashkent, -2006. -№5, p. 7-11. 9. SH.B.Axmedov., Аshrabov. А. А. On sheer force transfer across the cracks in RC elements // Журнал АН РУз «Проблемы механики», -Ташкент, -2016. -№4, p. 25-29. 10. Ashrabov A. A., J. Jayaprakash. Rehabilitation of Pre-cracked RC Push-off Specimens with CFRP Fabrics. First International Conference on Advances in Bridge Engineering, Brunel University, 26th - 28th June 2008, West London, UK, рр. 309 – 312. 11. Millard S. G., Johnson R. P. Shear Transfer Across Cracks in Reinforced Concrete due to Aggregate Interlock and Dowel Action. Mag. Conc. Res. 36, №126, Mar. 1984, рр. 9 – 21.