SIMULATION OF THE STRENGTH OF A FRAME OF A NEW
DESIGN ACM GIN MACHINE UNDER THE INFLUENCE OF EXTERNAL FORCES
30.07.2023
International Scientific Journal "Science and Innovation". Series A. Volume 2 Issue 7
Azizov Shuhrat Mamatovich
Abstract. The forces acting on the frame of a new design by two saw cylinders are analyzed. Using the values of these forces, simulations of allowable stresses, displacements and deformations were obtained in the Solidworks Simulation program. Based on the results, it has been proven that a frame designed according to this is resistant to external forces.
Keywords: frame of a new design, two saw cylinders, resistant, forces, simulations of allowable stresses, displacements, deformations
References:
1. Azizov Shuhrat Mamatovich (2023) The new construction of the ginning machine analyzes the damaging forces of cotton fiber and seed depending on the change of the volume of the working chamber and the location of the saw cylinders in the chamber. XORAZM MA’MUN AKADEMIYASI AXBOROTNOMАSI –8-1/2023
2. Shuhrat Azizov, Muhammadaminhon Ibrohimov, Farhod Uzoqov and Mirshoroffiddin Mirzakarimov The modelling and introductions of new type ribs of lattice of the two cylinder of gin E3S Web Conf., 273 (2021) 07020 https://doi.org/10.1051/e3sconf/202127307020
3. Shuhrat Azizov, Muhammadaminhon Ibrohimov, Farhod Uzoqov and Mirshoroffiddin Mirzakarimov. (2022) Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws. Engineering, 14, 329-338. https://doi.org/10.4236/eng.2022.148026
4. Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin, American Journal of Mechanical and Industrial Engineering. Volume 1, Issue 3, November 2016, pp. 103-106. https://doi.org/10.11648/j.ajmie.20160103.21
5. Azizov, S. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99. doi: 10.4236/wjet.2015.33010
6. Mamamtovich AS (2016) Analysis of the Influence of Geometric Characteristics of the Saw and the Gasket of Saw Gin on the Life of Saw at Different Distances between the Saw. J Textile Sci Eng 6: 256. doi:10.4172/2165- 8064.1000256
SCIENCE & INNOVATION